100% virgin pc sheet pc solid sheet

Home>Products > polycarbonate solid sheets > PC Solid Sheets

Parameter

PC stripe sheet is made by polycarbonate. Compared with common solid sheet, there is a special reinforcing design for pc stripe sheet, and the intensity for stripe sheet is better than common solid sheet. Single side contains UV protective layer, therefore, there are many excellent features of the sheet, such as good weather-resistance, good impact-resistance, heat insulation, soundproof, lighting, anti-UV and fire retardation, etc. and the sheet as very good roofing materials is widely used in ceiling lighting, ceiling access, outdoor decoration, sheds and greenhouse, etc.

  UpdateTime:2013/10/31  Hits:0

100% virgin pc sheet pc solid sheet

Specifications of pc sheet:

1) Thickness: 2mm-15mm

2) Light weight

3) High impact strength

4) Fire resista

 

Specifications of 0.3-15mm pc solid sheet

PC Embossed Sheet

1. ISO9001, SGS, ROSH

2. Size can be customized

3. Good impact resistance

 

2013 New Decoration Panel 0.3-15mm PC Solid Sheet

 

PC stripe sheet is made by polycarbonate. Compared with common solid sheet, there is a special reinforcing design for pc stripe sheet, and the intensity for stripe sheet is better than common solid sheet. Single side contains UV protective layer, therefore, there are many excellent features of the sheet, such as good weather-resistance, good impact-resistance, heat insulation, soundproof, lighting, anti-UV and fire retardation, etc. and the sheet as very good roofing materials is widely used in ceiling lighting, ceiling access, outdoor decoration, sheds and greenhouse, etc.

 

Features of 0.3-15mm

1. Light transmission

PC embossed sheet has very good light transmission. Prolonged sun exposure of UV coated plate does not produce yellowing, fogging and poor light. The loss of light transmittance is 6% for embossed sheet and 15%-20% for PVC after ten years. As light through its convex particles produces light scattering, it has good optical effect. For more information about light transmission, please feel free to contact us.

2. Anti-UV & Heat Insulation

UV protective layer, 98% UV absorbed.

3. Light weight, high impact strength,excellent physical and mechanical properties and well bending performance

The mechanical properties of pc embossed sheet are consistent with pc solid sheet. Maintaining good impact resistance for a long time in a wide temperature range (-40°C-120°C).

4. Fire retardation

The sheet meets the national standard GB8624-1997 and ranks at B1 retardant material level. In the process of combustion, the sheet does not produce any smoke and toxic gases, and automatically turns off from the fire. It has good fire retardant properties.

5.Wide-ranging application, good weather-resistance

Maintaining the stability of mechanical properties between -40°C to +100°C, the sheet does not occur the cold crisp above -100 ° C and without softening below 145 °C. Small size change from 100 ° C to -40 ° C, the rate of change is 0.3%. 2000 hours of artificial aging test towards the sheet, the yellowing degree was grade 2, and the transmission rate was decreased by 0.6%.

6. Soundproof

The sheet can effectively reduce the noise, and is the best choice for soundproof.

7. Convenience for transportation and construction

Light weight, standard size, convenient transportation & construction, easy cutting and punching, cold bent and good processing performance.

8. Condensation inhibition

Under normal circumstances, when the outdoor temperature is 0°C, room temperature is 23 °C and the indoor relative humidity is below 80%, the inner surface of the material does not frost.

9. Chemical resistance

The Sheet can resist various kinds of harmful corrosive materials, such as organic acid, inorganic acid, vegetable oil, neutral salt solution, aliphatic hydrocarbon and alcohol, etc.

100% virgin pc sheet  pc solid sheet

Specification of 0.3-15mm  pc solid sheet

Thickness: 0.3-15mm

Length: any

Width: 2100mm (7FT)

Color: Clear, green, blue, etc.

Special specification and color are available.

The surface  PE protective film.

Storage, transportation and usage of 0.3-15 mm pc solid sheet

Prohibit contact with wet cement surface and acid, alkaline material surfaces.

Prohibit contact with organic solvents and glue, paint composed thereof.

Keep the frame clean and the surface of rabbet groove flat. Dust and dirt of the sheet are generally wiped by soft cloth or sponge with mild detergent first and then washed by water thoroughly.

Choose the right thickness, allow flexure radius.

If use self –drilling screws for fixing, the hole must be pre-drilled, and the aperture should be 1.5 times larger than the diameter of the screw. Do not tighten the screw strongly, otherwise stress will arise, and crack on the sheet surface will appear.

Remain space for expanding, pay attention to inserting depth. Expanding Value = linear expansion coefficient × length × the maximum temperature variation (linear expansion coefficient of pc sheet is 7×10-5mm/mm/°C).

Use neutral glass cement and right gasket. Never use gasket of PVC material.

Use electrical tools (tungsten carbide saw) to cut, stabilize PC sheet to prevent their vibration. Don’t peel off protective film when cutting.

In case that marks have to be made before cutting, try to mark on protective film. If the marks must be made directly on PC sheets, use wax crayon instead of any sharp tool to mark.

Never peel off protective films until installation is completed.

It is suggested that smooth side is installed towards sun in order to realize the effect of the UV protective layer.

Application of 0.3-15mm  pc solid sheet

Commercial Building Lighting

Industrial architecture lighting

Stadium roof and indoor play area

Transportation infrastructure

Residential architecture lighting

Exterior–protected construction and curtain wall

Bathroom and swimming pool